Diamond Altimeter
Static Line Automatic Activation Device
http://freefallaccessories.com/wp-content/uploads/2016/03/SLAAD-Static-Line-Automatic-Activation-Device-Demo.mp4 Due to the extremely low exit altitude that Paratroopers exit from, there is very little time for the jumper to determine if they are in danger and deploy their Reserve Parachute in time for it to be able to open and slow the jumper to a safe landing speed prior to landing. The Static
Small Insertion Bundle
The Free Fall Accessories, Inc. Small Insertion Bundle System, (SIBS), was developed to provide a means to insert small equipment and survival gear into remote areas, quickly, reliability, and cost effectively. The SIBS can be easily clipped to a load, and static lined from a small aircraft, with little training required. The SIBS is drogue
Pneumatic Release Timer
The Pneumatic Release Timer (PRT) is a simple and reliable mechanical loop release timer. It does not use oil, is reusable, and it is ripcord activated. The PRT was originally designed to replace pyro de-reefers in small cargo canopies, and the USDA Forest Service Smoke Jumpers has experimented with using the PRT to delay canopy
Parachute Flight Data Recorder
The Parachute Flight Data Recorder (FRD) was designed to measure the flight performance of parachutes both round and square. The FDR measures Barometric Pressure, X,Y,Z-Accelerometer, X,Y,Z-Gyro, Magnetic Heading, Temperature and Humidity, and Indicated Air Speed. Sampling rate is 20 Samples Per Second. Data is stored on a Micro-SD card in a TXT format. The FDR
Electro Mechanical Actuator
The EMA is a mechanical rip cord puller that is triggered by an electrical pulse from an AGU or electronic AAD. The EMA allows the use of a conventional rip cord instead of a pyrotechnic loop cutter which has traditionally been the only option for mechanical action that is triggered by a computer or AAD.
Dual Event Trigger Controller
DETC
Air Drop Automatic Parachute Trigger
The Air Drop Automatic Parachute Trigger (ADAPT) was conceived of in 2007 as a controller for a Duel Parachute Cargo System we were working on at that time. This system had a reserve parachute and required an AAD that could detect a parachute malfunction and execute emergency procedures. Way ahead of its time, the ADAPT
AAD Cutter Simulator
The Cutter Simulator is used in place of a pyrotechnic cutter when testing AAD’s in a passive configuration. In the event that the AAD fires, the Cutter Simulator illuminates indicating that the AAD fired. This offers a visual and reusable method to indicate if an AAD has fried. With the proper connector the Cutter Simulator
Military Skydive Altimeters
SDM Series The SDM Series has been designed from the start to be a rugged and reliable instrument. It overcomes many of issues cited by users of the current military altimeter. It is almost 50% shorter, 50% lighter and has a counterweighted movement. It is designed to retrofit existing harnesses and rigs so as to